300 Weatherby 215 Berger load data

[Sako76]

Anyone have any starting points? Thanks.

 

[Broz]

76 grains of H-1000 would be a starting charge. The last one I set up shot so well at 2900 fps I didn't look for a higher node. I don't remember what that charge was. The owner doesn't shoot past 600 so there was not need to load up further

 

[Ladd]

My 300 PRC with a plus P from Defensive Edge loves shooting the 215 at or about 2900. I think that is the sweet spot with that bullet, regardless.

 

[Sako76]

Thanks!

 

[Willys]

Would think 2900 is a very mild load in the 300 wbee and 300 prc +p

 

[FEENIX]

Anyone have any starting points? Thanks.

Contact Berger Tech Support; Phil has always been very helpful.

 

[Sako76]

Thanks!

 

[Anthony]

300 weatherby
30” hart
230 Berger hybrid single feed
.050 jump HBN coated
85.5 N570
Fed 215
3060fps
6 round group.

 

[Anthony]

Here was the load from my 300 bee before I swapped barrels with the Berger 215. 81gr. of H1000 in my Mark V the OAL 3.655. I was getting 2906 fps out of a 26" tube

 

[Johnston]

300 weatherby
30” hart
230 Berger hybrid single feed
.050 jump HBN coated
85.5 N570
Fed 215
3060fps
6 round group.

Awesome shooting! Did you have any work done to the action?

 

[Anthony]

No work done to the action. I looked at having it done but I hard time finding someone who would work on the mark v action.

 

[BWKnives]

300 Wby with 26” Lilja barrel, 212 ELDX, F1215, 85 Gr Retumbo at 2996 fps. 0.6 MOA